Nice job. I like the rotisserie!! That would fine perfect in my budget...lol. Is there any way you could post or email me some more detailed pics? I would greatly appreciate it. My email is on my profile.
You have mail.
Here is the parts list for the rotisserie.
The curve parts was made from a 1 1/2 desktop I had around. 30 x 24 x 1 1/2 with around a 24" radius. I screwed one side of a piece of metal into it then rotated it from the bottom until it went off the board.
2: 2 x 8 x 84 for the Main boards
1: 4 x 4 x 42 for the front connect point.
2: 2 x 6 x 24 for the leg on the rotating side.
2: 2 x 6 x 30 for the other leg.
2: 2 x 4 x 36 for the Up portion
2: 2 x 4 x 60 for the Up portion brace.
Here is the material list.
Wood
_________________________________________
1: 4x4x8 ft
2: 2x8x8 ft
2: 2x6x8 ft
2: 2x4x8 ft
2: 1 1/2 x 24 x 30 Rotating pieces.
_________________________________________
Hardware
20 7/16 x 5 bolts
4 7/16 x 6 bolts
Attachment bolts:
3 1/2 x 8 bolts (front)
2 1/2 x 6 or 5" bolts (front 4x4)
8 1/2 x 8 bolts (back)