Author Topic: Correct placement of the OEM exhaust tips ? needed, PLEASE  (Read 5363 times)

0 Members and 1 Guest are viewing this topic.

Offline '78 LadyBird

  • Adv. Member
  • ****
  • Posts: 1971
Correct placement of the OEM exhaust tips ? needed, PLEASE
« on: September 14, 2010, 04:24:35 PM »
Frank wants to know:

What is the correct angle of exhaust tips and correct placement from front to back of the quarter panel?
Proud owner of
1978 Silver TA WS6/W72
1984 Firebird S/E
2000 Firehawk, #696
1954 Ford Skyliner

New Pictures added...
LINK TO OUR GALLERY
http://www.78ta.com/gallery2/main.php/v/See+Ya/

Heidi

Offline RENOVATIONS

  • Administrator
  • Lifetime Member
  • *****
  • Posts: 10623
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #1 on: September 14, 2010, 04:30:06 PM »
Here's pix previously posted by Rainman of the tips on his stock '78 T/A










Jeff

Projects:
_____________
1978 Trans Am
1970 Camaro
1970 'Cuda
1987 Fiero GT
1982 Trans Am
1986 Corvette

Offline '78 LadyBird

  • Adv. Member
  • ****
  • Posts: 1971
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #2 on: September 14, 2010, 04:58:59 PM »
Frank says:  THANK YOU!!!!!
Proud owner of
1978 Silver TA WS6/W72
1984 Firebird S/E
2000 Firehawk, #696
1954 Ford Skyliner

New Pictures added...
LINK TO OUR GALLERY
http://www.78ta.com/gallery2/main.php/v/See+Ya/

Heidi

Offline highway star

  • Member
  • **
  • Posts: 195
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #3 on: September 18, 2010, 09:39:27 AM »
The rear most part of the "splitter tips" should be directly in line with the rear most edge of the side marker lights. You should only be able to see approximately 2.5 to 3 inches (no more) of the exhaust tips below the rear fender.

http://forums.performanceyears.com/forums/attachment.php?attachmentid=8287&d=0

Offline hada76

  • Adv. Member
  • ****
  • Posts: 2808
  • '79 WS6 W72 M21
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #4 on: September 18, 2010, 09:59:54 AM »
those are good guidelines but remember there were variations even from factory...ive seen some aimed straight down while others angle out
« Last Edit: September 18, 2010, 10:03:52 AM by hada76 »
'76 T/A 455 4sp   sold
'78 T/A Y88 auto  sold
'79 T/A WS6 4sp
'70 Z/28 4sp

jeff

Offline kjkjkcjkcj

  • Lifetime Member
  • *****
  • Posts: 3587
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #5 on: September 18, 2010, 03:24:44 PM »
see that makes me mad because the guy who did my car was like nope this is how it should be we get bend diagrams that tell us exactly where they should be from stock and mine you can bearly see.  im soo pissed cuz i spent like 800 bucks on my exhaust and the tips should be stickin out way more.
-1979 Trans Am Ws6, W72 400, holley 650, #62 heads (toy)
-Silverado 1500 (daily driver)

Offline pointman

  • Sr. Member
  • ***
  • Posts: 1027
  • Ohio Firebirds Member
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #6 on: September 18, 2010, 04:51:58 PM »
I went with my own personal taste, my tips show about 2" and have a 10degree "kick out" to them. I like them that way, and really don't care if somebody else does'nt like them. To each his/her own I say!
Gerrit VK

78 Gold SE Y88 400 auto
79 Black 403 auto
86 Fiero SE V6
07 H3 Hummer
04 GMC Safari

Offline '78 LadyBird

  • Adv. Member
  • ****
  • Posts: 1971
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #7 on: September 22, 2010, 03:18:39 PM »
I personally like them tipped out a wee bit.  I'll show Frank these new posts.

THANKS everyone!!

I'm sorry, Kyle that yours didn't come out the way you wanted it.  Any way of fixing that problem?  I don't know if that is an easy fix or not.
Proud owner of
1978 Silver TA WS6/W72
1984 Firebird S/E
2000 Firehawk, #696
1954 Ford Skyliner

New Pictures added...
LINK TO OUR GALLERY
http://www.78ta.com/gallery2/main.php/v/See+Ya/

Heidi

Offline '78 LadyBird

  • Adv. Member
  • ****
  • Posts: 1971
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #8 on: September 22, 2010, 07:36:13 PM »
This is Heidis Husband Frank, I just wanted to say thanks so much for all of the info and everybodys help, it means a great deal to me to know that there are still people willing to help others that they don't know or have never met. Thanks Again!!!
Proud owner of
1978 Silver TA WS6/W72
1984 Firebird S/E
2000 Firehawk, #696
1954 Ford Skyliner

New Pictures added...
LINK TO OUR GALLERY
http://www.78ta.com/gallery2/main.php/v/See+Ya/

Heidi

Offline 4SPEED

  • Ohio Firebirds
  • Lifetime Member
  • *****
  • Posts: 7322
  • NFTAC & POCI Member
Re: Correct placement of the OEM exhaust tips ? needed, PLEASE
« Reply #9 on: September 22, 2010, 07:47:12 PM »
see that makes me mad because the guy who did my car was like nope this is how it should be we get bend diagrams that tell us exactly where they should be from stock and mine you can bearly see.  im soo pissed cuz i spent like 800 bucks on my exhaust and the tips should be stickin out way more.

it your car , and hes working for you.  the guy that did mine was WAS going to do the same. good thing I was right there making sure.  I like them about straight down.
77 W72 TransAM  (SOLD)
79 TransAM 4SPEED