Pages: [1]   Go Down

Author Topic: Interior bolts  (Read 812 times)

0 Members and 1 Guest are viewing this topic.

Offline Frode_skj

  • Sr. Member
  • ***
  • Posts: 1156
Interior bolts
« on: April 28, 2011, 03:50:49 PM »
Hi guys :) I have just started a little on the 81 Turbo Trans Am and in the interior I have some missing bolts...
Soooo, I was wondering if anyone knew the dimension for the bolt to the seat belts? the lower one that is bolted into the inner rocker panel.
Also, I'm missing two bolts for the passenger seat track, so I was wondering if you knew that dimension too? by dimension I mean thread size and lenght  :)
Logged
"79 Trans Am tenth Anniversary Edition"
"81 Turbo Trans Am"
Sad to see that people part out T\A's :( especially saveable ones

Offline eroc022

  • Lifetime Member
  • *****
  • Posts: 7655
Re: Interior bolts
« Reply #1 on: April 28, 2011, 04:05:28 PM »
the seat belt bolts, are t-50 torx head bolts size wise its a 1/2 x13 thread with no shoulder on it..... seat tracks are 3/8 x20 ? not sure on those but seat belts i do know...
Logged
Eroc
Fixing the car that Restore A Muscle Car jacked up....

Offline Grand73Am

  • Adv. Member
  • ****
  • Posts: 2782
Re: Interior bolts
« Reply #2 on: April 28, 2011, 08:13:08 PM »
The seat tracks to the floor bolts are 5/16-18, 1 inch long. You'll also need 4 large flat washers, 1-1/8" diameter. And 4 smaller flat washers about 5/8" to 11/16" diameter. The larger washers are for use on the large diameter seat leg bolt holes.
Logged
Steve F.
Pages: [1]   Go Up