Author Topic: Mounting bracket for the license plate (Read 3667 times)

rkellerjr · « **on:** February 28, 2007, 10:03:46 AM »

Looking for the mounting bracket for the front end of a '75 ...

GK_STAR · « **Reply #1 on:** February 28, 2007, 11:14:37 AM »

Will this work?
http://cgi.ebay.com/ebaymotors/75-81-Camaro-Trans-Am-Front-License-Bracket-NOS-GM-SS_W0QQcmdZViewItemQQcategoryZ34204QQihZ004QQitemZ140090356286QQrdZ1

rkellerjr · « **Reply #2 on:** February 28, 2007, 12:07:51 PM »

I believe it is but, let me ask folks this question....

Can anyone here post a pic of their plate in how it's situated with the valance? When I mock my plate being there it actually sits on the valance which I believe is wrong. My concern is whether there is a bracket that pushes the plate assembly away from the flat area you see on my car.

I'll post this same question over at TAC as well.

Rick · « **Reply #3 on:** February 28, 2007, 12:35:17 PM »

IIRC, Rich -- the factory bracket did just that. The plate is supposed to be mounted vertically, whereas the front of your valance is angled back under the car -- so the bracket is supposed to be angled to compensate. Or at least I recall that -- IN doesn't use front plates and never has so I don't know. :?

Eagle 1 · « **Reply #4 on:** February 28, 2007, 12:36:56 PM »

Quote

I'll post this same question over at TAC as well.

"Survey says." :lol:

Hitman · « **Reply #5 on:** February 28, 2007, 12:52:10 PM »

These are the only ones I could find right now......

and yes, I know some are 1974 and some are 1975.

GK_STAR · « **Reply #6 on:** February 28, 2007, 12:56:19 PM »

Here is one of the mounts that I found.....is this what you need?

You can zoom in pretty good to see them.....if this is what your looking for.

GK_STAR · « **Reply #7 on:** February 28, 2007, 01:14:52 PM »

I don't know if this link will help but here it is.

http://216.178.81.108/forums/showthread.php?t=387562

rkellerjr · « **Reply #8 on:** February 28, 2007, 02:14:23 PM »

OK, looks like I need those two bars from GK's pics and then the black plate from ebay to achieve the look that Brett posted with his pics. Excellent, that is exactly what I needed to know.

Anyone konw where I can get those bars in GK's pic?

rkellerjr · « **Reply #9 on:** February 28, 2007, 02:24:15 PM »

Quote from: "GK_STAR"

I don't know if this link will help but here it is.

http://216.178.81.108/forums/showthread.php?t=387562

Great thread, just what I needed!

GK_STAR · « **Reply #10 on:** February 28, 2007, 03:09:38 PM »

Here is another picture I found saying it's the bracket (s) you need.

Again...not sure as I've never had a 74/75 T/A but I hope it helps

rkellerjr · « **Reply #11 on:** March 01, 2007, 06:18:25 AM »

Exactly, I need those two brackets and then the black plate bracket. So, anyone out there have these or know where I can get them?