Well, I loosened the two screws on the bottom of the center bracket,, the two attached to the nose bracket, and the two on top just forward of the hood latch. The center bracket did not seem to want to move much so I took them out.....still does not want to move because it is wedged in with the nose bracket. Do I loosen the nose bracket bolts?
When I put in the condenser I am attempting to put one side in front of the rad support, push it back behind the headlight and then swing the other side behind the rad support. Problem is that I can't get the one side in far enough to have clearance on the other side. I am obviously missing something.
Signed,
Stuck again!