Ok,I did more checking today and pulled the bulkhead apart on the outside.I have power going into it from 2 wires both are black and red one big and one small,black with red strip and red with black strip the connection's are clean.Not all the fuses are getting power,NO tail light's,No dash light's,No brake light's or lighter...The wipers,turn signals in back work,gas guage,volt guage work..Ok for the big deal((All the A/C wires have been removed,all cruise control removed,The motor has been changed to a Pontiac 350 and the only wires going to the starter are positive battery cable and ignition wire. There are no fusible links anywhere to be found in the wiring so all that was changed from stock.Only one wire going to the distributer for power and no tach wire.If the 80 model had a computer it doesn't any more this is the old school wiring set up...350 motor,Edelbrock intake and carb,long tube stainless steel header's,Acell cap coil and wire's,and dual electric fan's with a flex fan.