Hitman's Pontiac Trans Am Forum

Trans Am Information => Aftermarket Questions => Topic started by: Mcmaster97 on May 14, 2019, 02:03:32 PM

Title: Help with a Shaker on a Chevy 350 with edelbrock
Post by: Mcmaster97 on May 14, 2019, 02:03:32 PM

I’m trying to mount a shaker from a 1978 trans am that had a 400 in it on a Chevy 350 with an edelbrock carb on it so I was wondering what conversion kit should I get or what do I need to do so I can mount it properly

Title: Re: Help with a Shaker on a Chevy 350 with edelbrock
Post by: RENOVATIONS on May 15, 2019, 12:32:55 AM

Locating the shaker from a 305 equipped T/A would be the  smoothest solution ;)

Title: Re: Help with a Shaker on a Chevy 350 with edelbrock
Post by: Wallington on May 15, 2019, 11:35:40 PM

Conversion kits courtesy of wreckers, look for Chev TA's as Jeff said.

Title: Re: Help with a Shaker on a Chevy 350 with edelbrock
Post by: Mcmaster97 on May 17, 2019, 02:53:29 PM

I only have just the scoop no base or anything so what parts would I need and any links would be a great help !

Title: Re: Help with a Shaker on a Chevy 350 with edelbrock
Post by: Wallington on May 17, 2019, 08:08:05 PM

Even better if missing most, you'll need the lot. Shaket scoop was specific and had adaptor to suit. Aircleaner base can be sourced from Firebird or Camaro.

Title: Re: Help with a Shaker on a Chevy 350 with edelbrock
Post by: RENOVATIONS on May 18, 2019, 08:17:29 AM

You might find this link helpful:

http://78ta.com/Pages/shaker.htm