Hitman's Pontiac Trans Am Forum
Trans Am Information => Trans Am Tech => Interior => Topic started by: Angelo on September 09, 2017, 08:55:39 PM
-
For anyone removing/replacing the power window motor looking for the correct size fastener and length, no one seems to recommend specifics other than "get some bolts that fit". Here's what I used, should save folks the frustration what to get when at the hardware store.
Quantity 4 each of: 1/4-20 button head 5/8" long bolts / screws, washers, lock washers and nuts. Button head should be on the inside, it is shallow enough to clear any items that move inside the door.
-
Old topic but good idea!!