Author Topic: Thinning out attic of parts.  (Read 9738 times)

0 Members and 1 Guest are viewing this topic.

Offline TAKID455

  • Sr. Member
  • ***
  • Posts: 1179
Thinning out attic of parts.
« on: November 07, 2012, 02:31:04 PM »
Making room for some up coming projects. Few sets of tail lights, fender vents, A/C vents, side marker lights, wiring harnesses, slapper bars, door panels , back windows  ect

Condition of parts are all 2nds and some 3rds meaning driver to nice (with some cleaning/ detailing). No New/NOS/ show car stuff. At least as it sit. Some can be restored to new like condition.  Most is from car that I have parted out over the last 15 years.   Keep in mind shipping is at least $7 for small parts and goes up from there.  Not all picture is for sale, just extras and stuff I will not be using.  Post what you need and I’ll derive a cost if available.   Shakers, bases, 79 nose (from my first T/A) not available at this time.
2nd gen firebird parts
1965 Imperial parts
Vintage VW and European parts
Some global shots of stuff






Really nice panels








Link top many more parts
http://smg.beta.photobucket.com/user/Takid455/library/parts%20for%20sale
2nd Gen Engineering
Specializing in Suspension and Driveline Performance Engineering
Custom/ Racing/ Restorations

Offline 80PCTA

  • Jr. Member
  • *
  • Posts: 12
Re: Thinning out attic of parts.
« Reply #1 on: November 07, 2012, 04:09:33 PM »
How much for the gold air extractors and the screens shipped to 45656

Thanks

Man this is like a candy store  ;D

Offline NWW-79 T/A

  • Adv. Member
  • ****
  • Posts: 1882
  • 16 Year Old T/A Owner
Re: Thinning out attic of parts.
« Reply #2 on: November 07, 2012, 05:15:49 PM »
Is that gold shaker for a 400? Just wondering
Romney/Ryan 2012

-1979 Solar Gold Trans Am in Restoration-

Offline oldskoolubr

  • Adv. Member
  • ****
  • Posts: 1950
Re: Thinning out attic of parts.
« Reply #3 on: November 07, 2012, 06:46:51 PM »
Ok lets start a list:  All shipped to 85139
1. Overflow with cap and bracket for 79-81 TA has the 403 in it at the moment
2. Dk Blue Door panels (are there 2-?) and better pics please
3. Above average to excellent shape Air intake hose and the elbow from the hose to the fender duct
Thank You!

Offline 80PCTA

  • Jr. Member
  • *
  • Posts: 12
Re: Thinning out attic of parts.
« Reply #4 on: November 07, 2012, 07:49:46 PM »
Looking for this model Quadrajet also

17080274

Offline Schroeder

  • Sr. Member
  • ***
  • Posts: 528
Re: Thinning out attic of parts.
« Reply #5 on: November 07, 2012, 08:29:27 PM »
how much for all the air ducting from the AC box on a 77 TA to the little duct that connects to the dash on the passenger and driver side.  I have those two little ones that connect to the dash far left and right vents but nothing in between them and the heater box and nothing going to the center dash vents period.  I do have the "Y" dash defrost piece.

Also want a price on the 77 manual.  Thanks.
« Last Edit: November 07, 2012, 09:02:15 PM by Schroeder »

Offline TAKID455

  • Sr. Member
  • ***
  • Posts: 1179
Re: Thinning out attic of parts.
« Reply #6 on: November 08, 2012, 02:40:58 PM »
Gold air extractors I believe are on a car. Would be an expensive pair of extractors :)  have other ones if you need a set

gold shaker is 400

old skool

use link at bottom for more door panel pics. panels are in nice shape.  - 140.  lot cheaper than new ones

Have overflow cap somewhere along with elbow.  - 50 for both or 50 for elbow and 10 for cap

no hoes for  a 403. At least nothing good. ..

shipping will be 40 or so due to door panel size.   240 shipped for above iclu PP


Will check on the carb



A/C duct (3 pc's) need to verify on the under glove box unit .  have 3 request for these parts - 125 shipped.  155 w/ manual incl PP
2nd Gen Engineering
Specializing in Suspension and Driveline Performance Engineering
Custom/ Racing/ Restorations

Offline 80PCTA

  • Jr. Member
  • *
  • Posts: 12
Re: Thinning out attic of parts.
« Reply #7 on: November 08, 2012, 03:04:59 PM »
Thanks
I was looking at the ones in the PB account.

I really need just the mesh behind the extractors if you have those seperate

Offline oldskoolubr

  • Adv. Member
  • ****
  • Posts: 1950
Re: Thinning out attic of parts.
« Reply #8 on: November 08, 2012, 03:21:09 PM »
Gold air extractors I believe are on a car. Would be an expensive pair of extractors :)  have other ones if you need a set

gold shaker is 400

old skool

use link at bottom for more door panel pics. panels are in nice shape.  - 140.  lot cheaper than new ones

Have overflow cap somewhere along with elbow.  - 50 for both or 50 for elbow and 10 for cap

no hoes for  a 403. At least nothing good. .. I can Get My OWN "HOES" :P

shipping will be 40 or so due to door panel size.   240 shipped for above iclu PP


Will check on the carb



A/C duct (3 pc's) need to verify on the under glove box unit .  have 3 request for these parts - 125 shipped.  155 w/ manual incl PP

What about the overflow itself?

Offline 79ban1

  • Sr. Member
  • ***
  • Posts: 759
  • Bandit X
Re: Thinning out attic of parts.
« Reply #9 on: November 08, 2012, 09:05:40 PM »
79 tail light set non cracked if possible

Offline Dogbone94

  • Member
  • **
  • Posts: 337
Re: Thinning out attic of parts.
« Reply #10 on: November 08, 2012, 10:28:23 PM »
turned metal shifter plate ..? and black visors...?

Offline TAKID455

  • Sr. Member
  • ***
  • Posts: 1179
Re: Thinning out attic of parts.
« Reply #11 on: November 09, 2012, 09:25:27 AM »
Black visors - 50 shipped

will check on shifter inlay

Have a few overs flows bottles seen in pics above. you want the whole thing cap & bottle? - 35 shipped

DO have vent mesh. painted gold. Removed to install a diff type of mesh design.  PM me offer and they are yours.  Or do you want the Honeycomb mesh?


All - I will be traveling 11/12-11/16. Will be able to correspond to requests, but shipping will be delayed until following week.
2nd Gen Engineering
Specializing in Suspension and Driveline Performance Engineering
Custom/ Racing/ Restorations

Offline drtracer58

  • Member
  • **
  • Posts: 282
Re: Thinning out attic of parts.
« Reply #12 on: November 09, 2012, 10:10:48 AM »
Is that a decent Air Intake Hose in Pic # 1 ??  if so ,How much ?
79 WS6-W72

Offline TAKID455

  • Sr. Member
  • ***
  • Posts: 1179
Re: Thinning out attic of parts.
« Reply #13 on: November 09, 2012, 03:27:52 PM »
That is a very nice hose for a '64-66 Imperial A/C system. Make offer on whole system. :)
2nd Gen Engineering
Specializing in Suspension and Driveline Performance Engineering
Custom/ Racing/ Restorations

Offline John007

  • Sr. Member
  • ***
  • Posts: 540
Re: Thinning out attic of parts.
« Reply #14 on: November 10, 2012, 01:37:06 AM »
PM sent..............