Its going well. We got the toe-board floor pan area welded in and puttied around. Re-shaping that big hole in the back seat area is challenging. The guy from whom we were borrowing the welder needed it back, so we are looking to borrow another or break down and buy our own. Got all the pieces back from sand blasting. Had the rear end blasted (removed the rust) and I painted that with the epoxy style paint, same as our sub-frame. We have been ordering most of our parts through a friend at the Napa distribution center, so we have been getting everything for about 50% off retail, which is nice. Only thing left is the rear leaf springs and we should have everything to get the car back in rolling stock condition. So aside from painting a few various pieces, we are about to reassemble the front end, then we need to get that floor pan and side in the rear seat done. The trunk has been tough mentally. We have been giving it a lot of thought and I really didnt want to have to replace the entire trunk pan. So we might patch the little holes in it and then someone else suggested to us to maybe have it Rhino-Lined all on the inside, which would toughen the whole thing up. Then we can carpet it and no one would be the wiser. Its just a trunk, and Im not necessarily going for show quality. I mean a new trunk pan is like $200 and then another $200 just to have it freight shipped here, so I might cut that corner. I have a family friend who is an upholsterer, so he will be sewing together my new seats (probably next summer). But we have plenty left to do this winter while we have less daylight and its cold out. My boss/buddy who is helping me with this project has hunting season coming up, so that will slow us down for a few weeks. Other than that, everything seems to be coming along rather nicely. The sad truth is that this project financially will take me probably 2+ years to complete. Not looking forward to the bill when we need to order a completely new dash and center console and door panels. Plus sound deadener, carpet kit, leather for seats. Oh and Im also going to buy the conversion kit to put A/C in the car. All that adds $$ to the project and thats what will slow me down. But Im optimistic and love working on it, so it will be really rewarding. Thanks for asking! I will provide more picture updates as I take them.