Pages: [1]   Go Down

Author Topic: engine ground??  (Read 1448 times)

0 Members and 1 Guest are viewing this topic.

Offline ski27fever

  • Jr. Member
  • *
  • Posts: 65
  • At a local cruise night
engine ground??
« on: July 25, 2015, 10:22:12 AM »
ok installed aluminum heads,the negative terminal from battery was always grounded to the stud on the old cast iron heads,any tips where I should ground to now?
will the frame be ok? 
Logged

Offline Blue TA

  • Jr. Member
  • *
  • Posts: 62
Re: engine ground??
« Reply #1 on: July 25, 2015, 07:55:17 PM »
The neg. ground should be connected to the alt. bracket. Make sure you scrape the paint off make a good ground.
I also ran another ground from the battery to the frame. And there should be a ground strap from the firewall
to the engine block.
Logged

Offline ski27fever

  • Jr. Member
  • *
  • Posts: 65
  • At a local cruise night
Re: engine ground??
« Reply #2 on: July 28, 2015, 11:48:57 AM »
thanks for the tips,everything is running smooth now.
Logged
Pages: [1]   Go Up