Replace the coil. It looks to me that you only have two wires going to the connectors. I think there's four...but maybe three. Also, your connector is broken. And, did you remove the connector closest to the cap or is it not there? I seem to recall a yellow wire that I don't see coming from your coil.
You should have wrap the tape all the way around the wire....just make sure those numbers don't fall off.
And I was totally in the land of Fords when I told you about the clips that hold the cap on
See those screws....they hold the cap on. There's a little arm that swings under the distributor body and holds the cap secure. There's four of them. Turn them 180 degrees to free the cap. You'll need to pull the cap to replace the coil.