Hitman's Pontiac Trans Am Forum
Trans Am Information => Restoration => Topic started by: 1979 Trans Am Y84 4sp on May 28, 2018, 02:12:02 PM
-
I had installed an OEM window regulator from a donor car....after it was installed the window does not go down the last one inch into the door....any suggestions on why that may be happening? Thanks!
-
"Probably" need to adjust the down bump stop bracket (inside the door)
-
Thanks Jeff for the advice
-
Check the stop, as mentioned. Another common error is having the remote mirror cable passing through the regulator assembly during door trim off time and locking up.