Welcome,
Guest
. Please
login
or
register
.
April 19, 2024, 08:15:52 AM
Home
Help
Calendar
Login
Register
Hitman's Pontiac Trans Am Forum
»
Trans Am Information
»
Aftermarket Questions
(Moderator:
Hitman
) »
Topic:
Roller Rockers
Print
Pages: [
1
]
Go Down
Author
Topic: Roller Rockers (Read 3450 times)
0 Members and 1 Guest are viewing this topic.
joeq28
Jr. Member
Posts: 20
Roller Rockers
«
on:
February 02, 2007, 05:45:43 PM »
Just looking for some input here guys. I'm thinking of putting some roller rockers on my T/A and I'm curious is it hard to do? What size should I use 1.5 or 1.65? These would be going on my 6x heads on my T/A. just looking to get some more power alot of ads say between 10-30 bolt on hp. I'm thinking of the harland sharp rockers.
Logged
72/4-speed
brian c
Lifetime Member
Posts: 4880
Ohio Firebirds Member
Roller Rockers
«
Reply #1 on:
February 03, 2007, 09:24:12 AM »
I'm running a set of Comp Cams roller tip 1.5 rockers on a Pontiac 455. Not much wear on them yet as the car isn't on the road.
I believe if you go to the 1.65 rockers you'll be looking at machine work on your heads to make certain the pushrods have the clearance they need. And I think you'll be needing tall valve covers as well so if you have the stock AC setup it won't clear the new covers.
Hard to do? Nope. Just pop your valve covers and follow the instructions for removing/installing the rockers. Make certain you have a new set of valve cover gaskets to replace the ones on your current block.
Logged
1978 Y88, '70 455 HO block bored 0.060, TH350, 3.42:1 gears...Oct '08 Fbodywarehouse Calendar - Woot!
1980 Firebird - no engine/tranny... to be pacecar clone
MacT/A80
Member
Posts: 312
Roller Rockers
«
Reply #2 on:
February 04, 2007, 10:16:12 AM »
i put a set of comp. roller rockers in my new motor and i bought a new (stock height) valve covers and i had no clearance issues, now i'm not sure about Harland sharps because of the shape, but i had problem w/ the comps.
Logged
[IMG]
1980 Trans Am, 400 Pontiac, auto
2011 Mustang, 1971 GMC C2500, 250 Straight 6, 4sp
Print
Pages: [
1
]
Go Up
Hitman's Pontiac Trans Am Forum
»
Trans Am Information
»
Aftermarket Questions
(Moderator:
Hitman
) »
Topic:
Roller Rockers