Hitman's Pontiac Trans Am Forum
Trans Am Information => Restoration => Topic started by: HotBird on June 26, 2010, 02:45:42 PM
-
I got my new wheels on, and tried putting the center caps in place. The rear ones went on no problem, but the front ones don't seem to clear the dust caps. It looks like the retaining clip is actually hitting the dust cap, but without the retaining clip, I'm afraid the caps will fall off. Any suggestions?
(http://www.78ta.com/gallery2/main.php/d/29615-1/myta+002.jpg)
(http://www.78ta.com/gallery2/main.php/d/29617-1/myta+005.jpg)
-
I used a dremel tool to grind out the inner diameter. Grind to the lip and you should be good to go.
-
That's a good idea. Thanks, I think i'm going to try that.
-
the dust cover on my 79 is lot shorter then what you have. this is the only pic I have , but you can see it's shorter
(http://www.78ta.com/gallery2/main.php/d/19991-1/TRANS+AM+FOR+SALE+013.JPG)
-
Mine are also a lot shorter. I got mine in the "help" section at Autozone. I think they were $3.99 each, if you didn't want to cut the retaining ring of your new caps.
(http://www.78ta.com/gallery2/main.php/d/29982-1/DSC05360.JPG)
-
there you go , thats what I have on mine.