Pages: [1]   Go Down

Author Topic: Will pulleys,brackets & accesories from a 350 Pontiac fit the 455 Pontiac?  (Read 667 times)

0 Members and 1 Guest are viewing this topic.

Offline TAFEVER

  • Member
  • **
  • Posts: 230
Will pulleys,brackets & accesories from a 350 Pontiac fit the 455 Pontiac?
« on: August 31, 2012, 07:52:21 PM »
Will the pulleys,brackets and other accessories from a 350 Pontiac fit on a 455 Pontiac?

What stuff from a 350 Pontiac will fit the 455 Pontiac?
Logged

Offline BigJer

  • Member
  • **
  • Posts: 200
Re: Will pulleys,brackets & accesories from a 350 Pontiac fit the 455 Pontiac?
« Reply #1 on: September 01, 2012, 12:51:09 AM »
I believe so, they are same block size and same deck height. Not sure if all years have same bolt holes.
Logged
I believe in my freedom and I believe in your freedom, when the two conflict,well...I believe in my freedom.

Offline 72blackbird

  • Adv. Member
  • ****
  • Posts: 2077
  • Old Birds don't die-they get faster, corner harder
Re: Will pulleys,brackets & accesories from a 350 Pontiac fit the 455 Pontiac?
« Reply #2 on: September 01, 2012, 08:11:27 AM »
It all depends on what size pulleys came on the 350P- there's a smaller diameter w/p pulley that you definitely don't want to use on a 455. But other than that the p/s and crank pullies are identical.

Geno
Logged

Offline TAFEVER

  • Member
  • **
  • Posts: 230
Re: Will pulleys,brackets & accesories from a 350 Pontiac fit the 455 Pontiac?
« Reply #3 on: September 01, 2012, 05:54:26 PM »
Quote from: 72blackbird on September 01, 2012, 08:11:27 AM
It all depends on what size pulleys came on the 350P- there's a smaller diameter w/p pulley that you definitely don't want to use on a 455. But other than that the p/s and crank pullies are identical.

Geno

Thanks for the info guys! Although I dont know how I would know which were the small pullies or big pullies because I have never seen either. :  )
Logged
Pages: [1]   Go Up