Author Topic: 1967 400 into a 74 4 speed TA (Read 621 times)

5150TA · « **on:** December 02, 2012, 10:04:44 PM »

how big of a deal is this swap gonna be , are the adaptor motor mounts all i need , or should i just sell this motor and look for one that will just bolt in ?

Driver79 · « **Reply #1 on:** December 02, 2012, 10:07:11 PM »

Ive considered a '69 350. When I was asking around about it everyone said it should bolt right in. I don't think that you would have any clearance issues.

Driver79 · « **Reply #2 on:** December 02, 2012, 10:17:34 PM »

Bolt in with the adapter that is

5150TA · « **Reply #3 on:** December 02, 2012, 10:25:16 PM »

i hope so , but i usually aint that lucky.

Driver79 · « **Reply #4 on:** December 02, 2012, 10:28:28 PM »

I hear ya on that one. I should mention that my car is an automatic so I can't really speak on your 4 speed. You already have the motor so I would say just lower it in and find out. Good luck

5150TA · « **Reply #5 on:** December 03, 2012, 06:41:00 PM »

will the intake and timing cover from the 74 fit the 67

b_hill_86 · « **Reply #6 on:** December 05, 2012, 06:55:59 PM »

Intake should fit. Timing cover might i THINK but i'm not sure. Seems to me there might have been two styles and it had something to do with the balancer.

b_hill_86 · « **Reply #7 on:** December 09, 2012, 12:10:00 AM »

Here's a link to a post that should help with the timing cover. http://www.78ta.com/HTAF/index.php?topic=40270.0

Author Topic: 1967 400 into a 74 4 speed TA (Read 621 times)

5150TA

1967 400 into a 74 4 speed TA

Driver79

Re: 1967 400 into a 74 4 speed TA

Driver79

Re: 1967 400 into a 74 4 speed TA

5150TA

Re: 1967 400 into a 74 4 speed TA

Driver79

Re: 1967 400 into a 74 4 speed TA

5150TA

Re: 1967 400 into a 74 4 speed TA

b_hill_86

Re: 1967 400 into a 74 4 speed TA

b_hill_86

Re: 1967 400 into a 74 4 speed TA