Pages: [1]   Go Down

Author Topic: Inner Fender Removal?  (Read 1548 times)

0 Members and 1 Guest are viewing this topic.

Offline Y84 Poncho

  • Jr. Member
  • *
  • Posts: 3
Inner Fender Removal?
« on: March 22, 2017, 08:06:43 AM »
Hey there, I cannot seem to get my inner fender well to pop out on the passenger side. It seems to contact my heater core (ac car).   I remove the driver side just fine and the passenger side slides around a good bit but the back end of the inner fender will not move past the fender lip.  Well I have to remove my AC components? Thanks in advance.  :D
Logged
-Zach

Offline TAKID455

  • Sr. Member
  • ***
  • Posts: 1179
Re: Inner Fender Removal?
« Reply #1 on: March 22, 2017, 09:45:40 AM »
Seems like it was forced or tweaked to get in there.  You may need to pop the fender off or loosen it.
Logged
2nd Gen Engineering
Specializing in Suspension and Driveline Performance Engineering
Custom/ Racing/ Restorations

Offline Y84 Poncho

  • Jr. Member
  • *
  • Posts: 3
Re: Inner Fender Removal?
« Reply #2 on: March 23, 2017, 11:00:27 AM »
Quote from: TAKID455 on March 22, 2017, 09:45:40 AM
Seems like it was forced or tweaked to get in there.  You may need to pop the fender off or loosen it.
Body man I am not. I understand where all the fender bolts are, which bolts will needs to be loosened? I'm assuming all wil have to be because of the nature of pressure points on metal. I worry that the fender will not line up. Should I take measurements between bolts or mark them first?
Logged
-Zach
Pages: [1]   Go Up