Ok, so I went out and worked on the T/A today. I got the glass removed, and removed just about everything on the rear portion of the car....here is what I found...
The driver side quarter is rotten on the bottom, not too bad if you ask me, upon inspection of the inside, it looks as if everything above the side marker is good...the passenger side is not as bad. This should be a simple fix...
Behind the bumper was rotted, of course...the inner piece at the bottom is completely gone...gotta replace both...
The trunk floor has some rust thru in a couple places, and the pieces that are on the sides that connect to the quarters are rotted, too...However, the channel where the trunk lid seal goes is in really good shape....
Now, here is the one I am not sure what to do with...on the drivers side of the filler panel between the back window and trunk lid, there was a small dent, after I removed the glass and panel, I found that the corner of the quarter panel, right next to the window was bent in slightly and the seam separated a little. When the window was in, you could tell because the channel where the window is setting didnt touch the glass in the corner next to the dent. Its just that little bit on the corner. You should be able to see it in the pic. Not sure how to fix it, any ideas?
I do have this car on it's way to looking good again....