- New Manley valves
- New Elgin valve springs and keepers
- New Badger pistons
- New Hastings molly rings
- New Dynagear timing gears and Durabond cam bearings
- New Dynagear timing gears and chain
- New Elgin lifters, push rods, rockers, balls and nuts
- New FelPro gaskets
- Cylinder heads are pressure checked
- Diamond honed valve guides
- Three angle cut valve seats
- All head surfaces are broached
- Blocks are bored with deck plates, cylinder walls are diamond honed
- Crankshafts are ground and polished for .002 clearance
- Camshafts are ground to O.E.M. specifications, hardened and polished
- Connecting rods are sized to .002 clearance
- Elgin Pro Stock Cam E-980-P
Cam Lift Int .295 Exh .310
Valve Lift Int. .443 Exh .465
Adv. Dur. Int. 280° Exh 290°
Timing Event @ .050 Cam Lift Duration Int. 214° Exh. 224° Opens Int. 0° BTC Exh. 49°BBC Closes Int. 34° ABC Exh. 5° BTC
Over Lap 61°
Lash Hyd
Lope Center line Int. 107° Exh. 117
- Back Cut Valves
- Adj. Valve Train
- Melling #689-M54DS High Pressure Oil Pump
- Intake ..
Edelbrock #350-21561
Performer Pontiac Intake Manifold Polished Finish