Hitman's Pontiac Trans Am Forum
Trans Am Information => Aftermarket Questions => Topic started by: tony1980 on June 28, 2020, 06:12:19 PM
-
Up to what size can you throw on stock 77 T/A without having to change anything. I've looked through the forum but haven't been able to find just a clear cut answer. I really want the 17s
-
There is no clear cut answer since what may fit on one car without mods, may require the rear seatbelt bulges flattened on another. Suspension type, height, rear brake types, all affect slightly.
YO 17" rims aren't terribly large, designed to fit these cars. They also have the custom type with separate hoops, but no need to alter the backspacing if you don't need to. I have the original one-piece YO R17's 285/40 on rear without mods and still some room, 255/45 on front and at full lock they just touch on the sway bar, but I also have custom steering so that's not helpful to you. New sports springs, sits maybe an inch lower each end. That's not even close to extreme, fairly common combo. You probably can't get those sizes on a Camaro due to the way their guards flare over.
-
Hmmm would it be safer to go 15s then? The car is all original so I just want to be able to bolt on and drive
-
Safer, why? If you pick the already well proven sizes there's no dramas. You end up with same approx. backspacing and overall tyre diameter is reused, the car doesn't know what size rim vs tyre profile it is.
-
I dont know tires/ wheels so I just dont want to make a mistake and get something that wont fit. If the 17s can bolt on with little adjustments I'd rather go that route but if not the 15s would be the better choice?
-
The 17's bolt on with no adjustment, they are designed for these vehicles. Stick to the offsets suggested unless you need custom, select tyres to suit. Generally, whatever works on 15's, works on 17's, only the profile changes.
-
Awesome thank you, sorry to bug lol but what are the suggested offsets sorry again, just kind of ignorant when it comes to the wheels
And where the heck do you find nice tires? Like with the red and white lettering and all that good stuff
-
Haha not bugging anyone. This is the one-piece cast rims, 17x9" with 5-1/8" backspace. The first run used 5-1/4" backspacing, not sure why the change, neither seemed to have dramas.
Should you go with the 2-piece rims, stick to the same backspacing and widths as already works.
I'm not sure of any the tyres in 17 come with coloured lettering or pinstripes, has to be added.
https://www.yearone.com/Product/wheels/sfw179gldv2s
-
Don’t forget the hub centric rings and make sure they give you a set when you order the rims or you will have vibration issues.
-
For the tires, I had 255/50/17 hankook (https://4wheelonline.com/Hankook-Off_Road_Mud_Tires.25) tires. No rubbing at all. This size has the same diameter with the factory size.