Topic: Battery hold down pictures needed

[1FSTLS1]

Can any one take a picture of the battery installed on the driver side with the hold down in place.  This is the tray I have made by goodmark

http://www.summitracing.com/parts/GMK-4321-300-70/?image=large



What hold down do I need and how does it go in.  Is this the one if so how does it go in. 



http://cgi.ebay.com/ebaymotors/1976-1981-TRANS-AM-FIREBIRD-BATTERY-HOLD-DOWN-BRACKET_W0QQcmdZViewItemQQhashZitem518cf49c28QQitemZ350257191976QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[Gold79ta]

You will aslo need this part for the battery hold down, I just had to do this also.
When I bought my car it had no hold down in it.
By the way when you buy these parts in does not come with the nut and washer, you will have to find your own.
Hope this helps
Bud,
http://www.yearone.com/serverfiles/fbshopmain2.asp?cat=4

[1FSTLS1]

Thanks what does the other part look lilke is it just a threaded rod?  Your link goes to the whole site.

[ta78w72]

There's a loop on the radiator support that the little hook goes into.  Then there's a J hook that connects to slot (top of your picture) on the battery tray and goes through the loop on the battery bracket.  A nut a washer completes the assembly.  They sell all that stuff at Ames.

[Gold79ta]

The other part you need is the same part that is used for your spare tire hold down, kind of looks like a j hook.
NPD has the same part numbers for them

[Gold79ta]

here is a picture of the part you need, you need the j hook on the left.

http://cgi.ebay.com/ebaymotors/67-68-69-70-71-72--Firebird-Trans-Am-Spare-Tire-Clamp_W0QQitemZ270489934961QQcmdZViewItemQQimsxZ20091124?IMSfp=TL091124192002r32303

[1FSTLS1]

Great that a million! 

[RENOVATIONS]

I'd check with Ames ( www.amesperf.com ) first.

#FP153 1976-1981 BATTERY HOLDDOWN CLAMP (GM) $15.50

#FP157  1970-1981 BATTERY HOLDDOWN CLAMP BOLT. 5/16 X 18 X 10" (RE) $6.00

Correct parts at a better price