Pages: [1]   Go Down

Author Topic: 403 cam advice  (Read 1207 times)

0 Members and 1 Guest are viewing this topic.

Offline Geeves

  • Jr. Member
  • *
  • Posts: 13
403 cam advice
« on: February 25, 2017, 02:05:31 AM »
I have a stock 403 with a dual exhaust from Pypes with a crossover, no cats.  Automatic transmission.  I have the 3711 Edelbrock intake that has not been installed yet.  The car has 3.23 gears and stock coverter.  I have a set of 7a heads that I want to install. What I need is some cam advice.  I don't want a race car, just a nice street beast.  I will not use a Performer RPM, please no suggestions of builds with the RPM.  I want a recipe for a 403 Olds with higher compression and performer intake and dual exhaust and 3.23 gearing.  Thanks
Logged

Offline Transatrom

  • Member
  • **
  • Posts: 162
Re: 403 cam advice
« Reply #1 on: February 27, 2017, 08:09:44 PM »
Interesting, I have the same combination and am looking for inputs on this setup as you are.

v/r
Dave

Logged

Offline Geeves

  • Jr. Member
  • *
  • Posts: 13
Re: 403 cam advice
« Reply #2 on: March 01, 2017, 02:20:05 AM »
Let me know what sort of advice you get.  Thanks
Logged

Offline leenin

  • Jr. Member
  • *
  • Posts: 1
Re: 403 cam advice
« Reply #3 on: May 08, 2017, 07:54:25 AM »
Found this article seemed to have some good info especially since you already have the heads....

www.texastransams.com/articles/2002ron_l_403_article.htm
« Last Edit: May 08, 2017, 08:00:57 AM by leenin »
Logged
Pages: [1]   Go Up