Pages: [1]   Go Down

Author Topic: 1975 Trans am gauge/circuit board plus bulb help  (Read 1518 times)

0 Members and 1 Guest are viewing this topic.

Offline gixxer711

  • Jr. Member
  • *
  • Posts: 36
1975 Trans am gauge/circuit board plus bulb help
« on: January 26, 2016, 10:26:23 PM »
I replaced the circuit board and bulbs in the cluster. There is an open hole next to the bulb plug that the fiber optic line goes in.  Is there supposed to be a screw there? There wasn't one there before.



Also, do the bulb sockets for the AC and fuel/voltage just pull straight out or are they supposed to twist out? I don't want to break anything.
Logged
Danny

Offline Wallington

  • Adv. Member
  • ****
  • Posts: 2640
Re: 1975 Trans am gauge/circuit board plus bulb help
« Reply #1 on: January 27, 2016, 02:59:24 AM »
Add a suitable self tapper to form a ground with the cluster body.
Logged

Offline gixxer711

  • Jr. Member
  • *
  • Posts: 36
Re: 1975 Trans am gauge/circuit board plus bulb help
« Reply #2 on: January 27, 2016, 10:39:46 AM »
Quote from: Aus78Formula on January 27, 2016, 02:59:24 AM
Add a suitable self tapper to form a ground with the cluster body.

Looks like a #8 sheetmetal screw works. I have some with a 1/4" hex head like others in the cluster. I can't see it hurting anything, if nothing was there before.

Got the bulbs out of the AC panel and fuel/voltage cluster. Those bulb holders are a pull out, not twist. Just to help others with similar a question.
Logged
Danny
Pages: [1]   Go Up