Hitman's Pontiac Trans Am Forum

Classifieds => Ebay Listings => Topic started by: 4SPEED on March 04, 2010, 06:56:58 PM

Title: roller tip rockers
Post by: 4SPEED on March 04, 2010, 06:56:58 PM
he has a buy it now of 79 or make offer with 20.00 shipping

I offered him 59 with shipping and got them  for 79 shipped

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=400105887941&ssPageName=STRK:MEWNX:IT

he has one set left.
Title: Re: roller tip rockers
Post by: Andy78TA on March 04, 2010, 08:17:11 PM
hmmm... can I use these with stock studs?
Title: Re: roller tip rockers
Post by: 4SPEED on March 04, 2010, 08:39:23 PM
yes,  but screw in studs would be stronger . most pontiac heads have them.

will not work with stock valve cover , with oil drippers.   
Title: Re: roller tip rockers
Post by: Andy78TA on March 04, 2010, 09:30:32 PM
hmmm well if I buy these than I have a new excuse to buy new valve covers... but I did just put the car semi back together... decisions decisions
Title: Re: roller tip rockers
Post by: 4SPEED on March 04, 2010, 09:44:06 PM
I got my valve covers from ames .  the stock low profile w/o drippers.  ames pg. 122 part FN651
Title: Re: roller tip rockers
Post by: Mongo on March 04, 2010, 10:12:49 PM
You got a deal Doug. I bought a set from another guy a couple weeks ago. 100 bucks shipped. Locks included though.
Title: Re: roller tip rockers
Post by: 4SPEED on March 05, 2010, 03:30:36 AM
quote/ A set of 16 rockers comes with Self Lock Nuts and Pivot Ball.

did you get poly lock's with yours?  they are to tall  for the stock valve cover.
Title: Re: roller tip rockers
Post by: Mongo on March 05, 2010, 01:29:47 PM
yes they are. Im having valve trouble already. Installed heights are off by alot and valve retainers will contact the valve seals. I need to get more machining done.
Title: Re: roller tip rockers
Post by: 4SPEED on March 05, 2010, 03:35:33 PM
haha . I just got off the phone with my motor guy . he just told me the same thing. so there going to be cut down.  mine is at .015  and need .050  clearance
Title: Re: roller tip rockers
Post by: Mongo on March 06, 2010, 01:05:32 AM
This is the fun part. Figuring out what fits with what.