Hitman's Pontiac Trans Am Forum

Trans Am Information => Trans Am Tech => Electrical => Topic started by: fb_rider on May 07, 2006, 07:08:23 AM

Title: Heater control vacuum hookups
Post by: fb_rider on May 07, 2006, 07:08:23 AM
In the process of putting my dash back in, it appears that one of my vacuum tubes going into the heater control came out of the connector.  It is a black tube that goes into the center of the firewall.  There are about 5 holes left in the connector, so I'm not sure which one is goes into.  I see that each hole has a number on it - does anyone know which hole each tube goes in?
Title: Heater control vacuum hookups
Post by: fb_rider on May 07, 2006, 10:08:58 PM
No need for anyone to respond - I solved this issue.  What I found was that many of the pins for the connector are "dummies".  There was only one real connector left and I only had one loose wire - so even I was able to figure that one out.  Thanks.