Author Topic: control and vacum harness  (Read 345 times)

0 Members and 1 Guest are viewing this topic.

Offline mikecoachusa

  • Jr. Member
  • *
  • Posts: 41
  • Referrals: 0
control and vacum harness
« on: June 17, 2010, 03:45:52 PM »
where does the white vacum hose connect on the heater box?

Offline ta78w72

  • Lifetime Member
  • *****
  • Posts: 6297
  • Referrals: 0
Re: control and vacum harness
« Reply #1 on: June 17, 2010, 03:50:35 PM »
The port on the back of the heater box towards the firewall.

[attachment deleted by admin over 90 days old]
« Last Edit: June 17, 2010, 04:02:15 PM by ta78w72 »

Offline mikecoachusa

  • Jr. Member
  • *
  • Posts: 41
  • Referrals: 0
Re: control and vacum harness
« Reply #2 on: July 03, 2010, 06:57:49 PM »
the diagram you posted was helpful but i am still struggling with the arrangement of vacum lines. on the diagram the control switch is numbered 2-5-4-6-3.  my actual control switch is numbered; 2-3-6-1-5 and i cannot figure out the colors to numbers...have tried swithcing 1 for 6 and 6 for 4 and so on but to no avail.....i noticed the diagram you sent is for a 78  my car is a 79 TATA..any advice??

Offline ta78w72

  • Lifetime Member
  • *****
  • Posts: 6297
  • Referrals: 0
Re: control and vacum harness
« Reply #3 on: July 03, 2010, 11:01:53 PM »
email sent.  Positions on the diagram are not the actually positions.  They are arranged for clarity.  There was no diagram for 79...at least not one that I could find.