Author Topic: 1979 Trans Am Drivers Power Window  (Read 807 times)

0 Members and 1 Guest are viewing this topic.

Offline 1979 Trans Am Y84 4sp

  • Jr. Member
  • *
  • Posts: 8
  • Referrals: 0
1979 Trans Am Drivers Power Window
« on: May 28, 2018, 02:12:02 PM »
I had installed an OEM window regulator from a donor car....after it was installed the window does not go down the last one inch into the door....any suggestions on why that may be happening? Thanks!

Offline RENOVATIONS

  • Administrator
  • Lifetime Member
  • *****
  • Posts: 10522
  • Referrals: 0
Re: 1979 Trans Am Drivers Power Window
« Reply #1 on: May 28, 2018, 05:07:07 PM »
"Probably" need to adjust the down bump stop bracket (inside the door)
Jeff

Projects:
_____________
1978 Trans Am
1970 Camaro
1970 'Cuda

Offline 1979 Trans Am Y84 4sp

  • Jr. Member
  • *
  • Posts: 8
  • Referrals: 0
Re: 1979 Trans Am Drivers Power Window
« Reply #2 on: May 29, 2018, 06:25:07 PM »
Thanks Jeff for the advice

Offline Aus78Formula

  • Adv. Member
  • ****
  • Posts: 2240
  • Referrals: 0
Re: 1979 Trans Am Drivers Power Window
« Reply #3 on: May 30, 2018, 05:48:00 AM »
Check the stop, as mentioned. Another common error is having the remote mirror cable passing through the regulator assembly during door trim off time and locking up.