Author Topic: Bracket for Hood latch Handle placement  (Read 853 times)

0 Members and 1 Guest are viewing this topic.

Offline Arcticman

  • Jr. Member
  • *
  • Posts: 4
  • Referrals: 0
Bracket for Hood latch Handle placement
« on: September 04, 2018, 07:07:26 PM »
Hello everyone, I have a question and hope someone can send me some Pic's. I have a 76 TA that the front bumper and cowl was disassembled when I bought it. I'm now putting it back together and I can't figure out how the hood latch handle is attached. I have the small bracket that is on the pull handle down under bumper, but I can't find the attachment point for it. I have looked at the bumper, Rad support, cowl..... I don't see any obvious place for the two bolt holes. Thanks for the help.

Offline quizkid32

  • Jr. Member
  • *
  • Posts: 28
  • Referrals: 0
Re: Bracket for Hood latch Handle placement
« Reply #1 on: September 05, 2018, 07:52:17 AM »
Maybe this would help...see attachment.

Offline quizkid32

  • Jr. Member
  • *
  • Posts: 28
  • Referrals: 0
Re: Bracket for Hood latch Handle placement
« Reply #2 on: September 05, 2018, 07:53:41 AM »
Picture is for a 79, but the under structure may be close for the latch.

Offline quizkid32

  • Jr. Member
  • *
  • Posts: 28
  • Referrals: 0
Re: Bracket for Hood latch Handle placement
« Reply #3 on: September 05, 2018, 07:58:13 AM »
The picture is a 79, but might help with the under structure attachments. The cable clip on my 79 slips into a bracket on the center support under the hood latch. Hope it helps.

Offline Arcticman

  • Jr. Member
  • *
  • Posts: 4
  • Referrals: 0
Re: Bracket for Hood latch Handle placement
« Reply #4 on: September 05, 2018, 10:40:26 AM »
Mine is a metal handle that has a bracket that attaches to support. I have a 78 TA and that is a cable. Thanks for the pictures.