Author Topic: looking to buy  (Read 2100 times)

0 Members and 1 Guest are viewing this topic.

Offline the right TA

  • Jr. Member
  • *
  • Posts: 1
  • Referrals: 0
looking to buy
« on: July 20, 2006, 08:47:10 PM »
Hello Everyone !

Im brand new to the board and TA's  ... Im looking to buy one but had no idea how complicated  it is to chose, theres just too many options/ choices.

 I dont want to just act on impulse and buy one only to want another one with something special. I'd really like to find a better than average  " rare" car or atleast less common TA .. maybe a 79'.    

If anyone could help me with some of my questions or give me some suggestions i'd really appreciate it.  ( a few years ago i bought a 1992 Camaro RS/ 5spd TBI and knew nothing about TPI 350's all i knew was i wanted a third gen ..boy do i hate 305's :(   Now i really want a TA but dont want to make the same mistake and settle for less.

- what year offerd the biggest motor.
- what options/year  are rare on a TA
- what kind of power does a 403 create... (im looking for the most power i can get out of a stock motor)

Offline HughJass

  • Member
  • **
  • Posts: 378
  • Geoff
  • Referrals: 0
looking to buy
« Reply #1 on: July 20, 2006, 09:18:45 PM »
Look here for production numbers for each year

The 455 was the largst engine offered with the Super Duty being the king of those.
Horsepower = $$$$$
Almost every motor will make decent HP if you put enough money in it.
I have seen a 500 HP pontiac 350 but it was $7000!

403 was an Oldsmobile engine and there are a few Olds builders out there and they can be a decent performance engine.
You have to decide what your plans are for the car, cruiser, daily driver or strip warrior, each one will be different.
Light travels faster than sound. That's why some people appear bright until you hear them speak.

79 W72 WS6,  work in progress - nicknamed Lucy

Offline MacT/A80

  • Member
  • **
  • Posts: 312
  • Referrals: 0
    • Mac's Myspace
looking to buy
« Reply #2 on: October 29, 2006, 10:23:48 PM »
if your looking to stay stock and have a little higher hp and have a reliable car, you might want to buy a car that has the 400cu. not the 403. the reason is that the 403's had a thinner walled block than the 400 so if you ever ended up building up the top end with cam,lifter etc. you would probably blow out the bottom end. A stock 400 in 76-79 was around 180hp, 360lbs torque, definately a freeway flyer but a nice cruiser. The turbo T/A's in 81 put out about 220 hp stock with 301cu block. like hughjass said it takes some dough to build any engine, but i just bought a 1974 400cu motor w/ 400hp, 10:1 compression and only 30,000 miles since the rebuild all for 1200 bucks. So you don't need a ton of $ to build a pontiac 400 into killer. hope this helps
1980 Trans Am, 400 Pontiac, auto
2011 Mustang, 1971 GMC C2500, 250 Straight 6, 4sp