Author Topic: Putting the y88 back together  (Read 797 times)

0 Members and 1 Guest are viewing this topic.

Offline Y88-Brandon

  • Jr. Member
  • *
  • Posts: 6
  • Referrals: 0
Putting the y88 back together
« on: March 21, 2010, 08:29:48 PM »
Starting to put my winter project back together. I am using Por-15 to paint the frame and body, everything else i am powder coating myself./m20 muncie trans/

Offline rad400

  • Adv. Member
  • ****
  • Posts: 2102
  • Referrals: 0
Re: Putting the y88 back together
« Reply #1 on: March 22, 2010, 09:28:36 AM »
Looks good Brandon
Conrad
79 Trans am 400 t400 3500 stall #12 heads holley 750 vac carb. Torker II intake 3:73:1 gears 12 bolt rear.

Offline SoonerTA

  • Adv. Member
  • ****
  • Posts: 2164
  • Referrals: 0
Re: Putting the y88 back together
« Reply #2 on: March 22, 2010, 07:45:14 PM »
Y88-Brandon...Welcome to the site!  Everything is looking great!  Keep us posted on the build and always post pictures!  Good luck with the build.

Offline 4SPEED

  • Ohio Firebirds
  • Lifetime Member
  • *****
  • Posts: 7321
  • NFTAC & POCI Member
  • Referrals: 0
Re: Putting the y88 back together
« Reply #3 on: March 23, 2010, 07:38:01 AM »
looks good.  I see you did some floor work, did you do any other patch work to her. 
77 W72 TransAM  (SOLD)
79 TransAM 4SPEED

Offline Y88-Brandon

  • Jr. Member
  • *
  • Posts: 6
  • Referrals: 0
Re: Putting the y88 back together
« Reply #4 on: March 27, 2010, 09:42:47 AM »
I ended up replacing both quarter pannels also