Author Topic: 1.52 rocker arms  (Read 662 times)

0 Members and 1 Guest are viewing this topic.

Offline Cecil07

  • Member
  • **
  • Posts: 351
  • Referrals: 0
1.52 rocker arms
« on: July 26, 2011, 09:25:26 AM »
Hey guys.... i recently had a rocker arm break and now looking to up grade/fix.... I found a set of roller rockers... with a ratio of 1.52.... not to ask a stupid question but... i thought stock was 1.5... is the 1.52 close enough to stock not to worry about pushrod lenght?..thanks for any insight..

Offline highway star

  • Member
  • **
  • Posts: 193
  • Referrals: 0
Re: 1.52 rocker arms
« Reply #1 on: July 30, 2011, 01:58:11 AM »
I'm using the Comp Cams Magnum roller tip 1:52 and I don't recall having to get different length push rods.  I did get the Comp Cams chrome moly push rods tho, for a '78 400 6x-4 heads.

Offline Cecil07

  • Member
  • **
  • Posts: 351
  • Referrals: 0
Re: 1.52 rocker arms
« Reply #2 on: July 30, 2011, 09:40:12 AM »
ok.. thanks for the info.. think im going to go with them...

Offline SoonerTA

  • Adv. Member
  • ****
  • Posts: 2164
  • Referrals: 0
Re: 1.52 rocker arms
« Reply #3 on: July 31, 2011, 06:38:23 PM »
Thats right.  There is no need to worry about pushrod length with the 1.52's.