Author Topic: DIY: Power window 4 relay setup (w/pictures)  (Read 62054 times)

0 Members and 1 Guest are viewing this topic.

Offline formula1le

  • Jr. Member
  • *
  • Posts: 3
  • Referrals: 0
Re: DIY: Power window 4 relay setup (w/pictures)
« Reply #15 on: June 03, 2017, 09:40:48 PM »
To check the motor you must take a single battery lead and with the motor connector unplugged, jump one terminal then the other but not both at the same time-this should get the motor going up/down. If not, make sure the door shell is well grounded and retry. If it still doesnt go, motor most likely is bad.

Offline Aus78Formula

  • Adv. Member
  • ****
  • Posts: 2094
  • Referrals: 0
Re: DIY: Power window 4 relay setup (w/pictures)
« Reply #16 on: June 04, 2017, 06:40:23 AM »
Yes, ground the door and add live to up or live to down.

Offline lee01

  • Member
  • **
  • Posts: 444
  • Referrals: 0
Re: DIY: Power window 4 relay setup (w/pictures)
« Reply #17 on: August 10, 2018, 10:51:05 AM »
Photobucket gate, so I lost many good picture
There atleast the wiring diagram I made back then
Hope this help


Current project:
90 Mustang GT 5.0
10 STI Sportech
Last T/A's
1979 x 4