Author Topic: Replacement Stereo  (Read 798 times)

0 Members and 1 Guest are viewing this topic.

Offline Stephen W.

  • Jr. Member
  • *
  • Posts: 2
Replacement Stereo
« on: October 12, 2020, 10:22:36 PM »
Hello and thank you, First post here and new 79 Trans Am owner. I need help locating and need advice on swapping out radio. pulled aftermarket radio and Im left with a jagged hole and no real "pocket" for the new radio to sit in. Any advice on where to find Pocket or how to seat new radio so it's flush. Thank you

Offline b_hill_86

  • Sr. Member
  • ***
  • Posts: 745
  • Sterling to Starlight
Re: Replacement Stereo
« Reply #1 on: October 13, 2020, 12:04:36 AM »
Are you trying to install another modern single DIN radio or going back to a factory style radio?
-Brian-

1977 Trans Am 400 4 speed hardtop

Offline Stephen W.

  • Jr. Member
  • *
  • Posts: 2
Re: Replacement Stereo
« Reply #2 on: October 13, 2020, 08:38:40 AM »
Hi, No its another modern single DIN. Its the one in the picture.

Offline b_hill_86

  • Sr. Member
  • ***
  • Posts: 745
  • Sterling to Starlight
Re: Replacement Stereo
« Reply #3 on: October 13, 2020, 09:18:46 AM »
Sorry didnít see the pic at first. There is usually a sleeve that comes with new radios like this. https://www.ebay.com/itm/272547283653 Then you bend the tabs on it to hold it in place and slide the radio in.
-Brian-

1977 Trans Am 400 4 speed hardtop

Offline Aus78Formula

  • Adv. Member
  • ****
  • Posts: 2544
Re: Replacement Stereo
« Reply #4 on: October 13, 2020, 01:41:09 PM »
Very common to be able to find a single DIN insert that works. The original radio was secured by the faceplate, now cut away, and a support bracket. You may have to invent something to suit the new unit, albeit much lighter.