Hitman's Pontiac Trans Am Forum

Trans Am Information => Trans Am Tech => Topic started by: 78T/AKID on March 28, 2021, 08:04:10 AM

Title: 1978 decal specs
Post by: 78T/AKID on March 28, 2021, 08:04:10 AM

 Does anyone have the correct factory specs on correct place of hood bird and call out on shaker...

Title: Re: 1978 decal specs
Post by: b_hill_86 on March 28, 2021, 10:06:20 AM

4.10 inches from the bottom edge of the hood to the tail, then the rest they just say to center. (Assuming not the Y88/79 and 80 style bird

Shaker callout is 1.2in from the edge of the opening to the edge of the decal. The manual also calls for the decal to be .28in from the top edge of the shaker but since that’s more rounded than what the manual suggests I just kind guesstimated mine.

Title: Re: 1978 decal specs
Post by: Hitman on March 28, 2021, 01:32:52 PM

Try this.

Title: Re: 1978 decal specs
Post by: 78T/AKID on March 28, 2021, 03:35:21 PM

Thanks guys for the help..

Title: Re: 1978 decal specs
Post by: b_hill_86 on March 28, 2021, 04:42:41 PM

Never even know we could post photos on the site without a photo hosting site lol

Title: Re: 1978 decal specs
Post by: Hitman on March 28, 2021, 07:16:36 PM

They have to be small photos..... less than 192k

Title: Re: 1978 decal specs
Post by: b_hill_86 on March 28, 2021, 07:55:39 PM

Good to know. Thanks.

Title: Re: 1978 decal specs
Post by: Wallington on March 28, 2021, 09:53:52 PM

And for 78 it depends what model or you get none there. I'd still add one.