"Our EXPRESS wiring is our most popular model for your application. The EXPRESS is a very small fuse panel and the part number for the complete wiring system is XP-768. It has all of the wiring needed to pass most state inspections, fire the engine, gauges, third brake lights, room for A/C. P/Ws. P/Ls. Stereo Radio memory for digital systems and all the toys you might want to add and then some. We can usually ship in a couple days. I am here if you have questions and I try to reply quickly. This is a custom harness and uses far better materials and has a different appearance to the stock spaghetti.
EXPRESS Series
WE CAN BUILD ANY COMBINATIONS OF THE COMPONENTS MENTIONED BELOW and MORE!
Small and Big V8 engines
Alternator types: GM Built in regulator or, One wire
Distributor: Points, HEI, MSD, Aftermarket
Connectors for stock ignition switches or our IS-02 dash switch, GM column mounted
Gauges: Stock clusters or any Aftermarket.
Turn signal switches: Stock columns, GM (includes 3 7/8 &4 1/4 inch connectors) aftermarket models also
"New" GM head light switch provided.
All fuse box connections for fuel injection GM or aftermarket
"New Power Junction block provided. Allows multiple battery feed
connections to be made without over loading the starter solenoid stud.
Includes back-up and side marker light wiring.
Electric Cooling Fan wiring included.
XP-768......$429.95"
"REPLY
The flicker is the circuit breaker tripping due to an over load. Aftermarket headlight bulbs require a relay on them Our HR-56 (single relay) or HR-58 (twin relays) are best.
By the way, I plan on using an aftermarket Alpine stereo soon, so I need my harness to work with that as well. Also, does your harness actually cover everything?
REPLY
There is always something that is not covered so I cannot answer that with a yes and be sure without inspecting your car. If you have motorized headlight covers, no they re not included. Yes, it will wire a car so you can drive down the road. and your lights work.
I also plan on installing a kill switch, an aftermarket alarm system and new aftermarket in dash gauges for my car sometime in the future, so I need a good setup for those as well. My car has power windows, pulse wipers, originally had a/c but no longer in car, a heater, blower motor, Olds 350, but plan on getting a pontiac 400.
REPLY
Our EXPRESS wiring will work great. Order the optional dash gauge wiring kit so the aftermarket gauges will be easier to install.
Ive got a dome light,
REPLY
See our EX-7 and EX-9 interior light wiring kits
4 4x6 angel eye headlights that use the three prong adapter instead of my stock two prong socket.
REPLY
Dual headlight wiring and I suggest the HR-58 relay system
I also have a dimmer switch on the floor for headlight hi/lo functionality.
REPLY
Standard
Id like to install an under hood light as well as a trunk light.
REPLY
See our TS-15 automatic light for both ends of the car.
"
http://www.hotrodhotline.com/pr/2009/09ronfrancismay2/http://www.ronfrancis.com/prodinfo.asp?number=AC-66